Seeing double

Hello people!

This year, just before Christmas, I decided I wanted to give me a present. So, I started by buying an used 2005 Volvo S60 rear bumper with all the brackets. So I searched the net, and in the end, I found one in Hungary at a salvage shop. After speaking several times with the owners of the shop, I went ahead and bought it, along with a pair of 2005 Volvo S60 tail lights, based on the pictures they sent me by mail:

However, they proved to be very deceitful and highly unprofessional. I ended up getting this piece of junk and no tail lights after nearly a month of waiting:

The sad truth: it wasn't even the same color as the one depicted in the photos they sent me

This was the "icing on the cake": broken plastic trim 

After looking at it, I almost decided to drop the entire project, the blog and everything. After almost a month of being constantly on the road, I managed to get the car to a specialist shop, where my muffler was cut down. A few days later, my new tips arrived, so we started by changing the rear bumper. We did this for 2 reasons. First, my obsession of updating the looks of the car to the newer P2 Volvo S60. Second, it was much easier to cut the hole in that spoiler for the right hand exhaust tip. 

Original bumper off

The conversion of the rear bumper is very easy if you have the side brackets. They are needed to ensure a perfect fit. Even with the '02 brackets installed you can mount the newer bumper, but the fitting will be a little off. 

I'll cover the rear bumper conversion in another post in the DIY section.

What followed was a lot of welding.

The split for the dual exhaust

The split installed

Measuring the clearance of the new left exhaust tip

 Final position of the exhaust tip

Left side tacked into position

The rear bumper was then cut to match the left side, and the exhaust pipe was tacked also into position.

All it took was to finish welding all the parts together and presto:

 The main advantage of this system over the commercial ones like I mentioned in my wish list is that the exhaust coming out of the dual pipes is equal or symmetrical

In January I will take the rear bumper back to the specialist shop for repairs and paint and I will keep you posted. Till then, one last picture:

I will end this post wishing you all, a Merry Blessed Christmas and A Brand New Year full with wishes that will come true!

Safe journeys everyone!

UPDATE: 25.01.2014

Hello all!

I managed to fix and paint the bumper at a specialist shop. Now, the rear end transformation is almost complete. All I need now is to rebadge the car with the new spread VOLVO lettering and a pair of 2005+ rear lights.

Leaving the shop

At home, in the garage

Safe journeys everyone!

Let's breathe

Hello again!
Yesterday, it was a glorious Sunday. After I wrote the last post, I started the day willing to show some more love to my car. And since I knew my car had a problem, I started the first project of the day of cleaning the MAF (or Mass airflow sensor).

Well, I wanted to do this for a while now, because when I floored the accelerator pedal, I noticed a milliseconds stall in the acceleration, especially after the 120 km/h mark. So I did some research and concluded the a MAF cleaning was in order.

The process of cleaning the MAF is very simple. 

I started by removing the connector from the MAF using a small flat head screwdriver.

Then, I removed the O ring that was attached to the MAF again with the flat head screwdriver

Now I had to unscrew the 2 Torx t25 screws that hold the MAF to the air filter housing.

One was up and in plain sight,

the other was under the MAF and don't know why was highly oxidized

At this point the MAF was loose on one side, the side that was connected to the air filter housing. I removed the top of the air filter housing and pulled the MAF out. I must note that I had help from my brother in law who has pulled the air filter housing top while I tried to hold still the tube that contains the MAF. I strongly suggest you get an extra pair of hands when you do this process.

Here is the MAF disconnected from the air filter housing, resting on the air filter.

 Next, I was really curious about the state of the air filter, so I pulled it out. What comes next it's not a shocker for me, but it may be to you:

Well, as I expected, the filter housing was full of sand, dirt, a variety of bugs, even small stones.

So, I continued to take out the MAF, again with the help of my brother in law who this time held the tube and me pulling the MAF out completely from the tube.

Then I placed the MAF on some paper towels and used this Electric motor Cleaner product. I sprayed this product in the MAF from both ends. I know, some will say that I should have used the CRC MAF Cleaner product, but I was assured by others that any electric cleaner product will do. I sprayed the MAF twice with plenty of drying timed in between and using a fair amount of the cleaning product.

  Every time, this black sludge dripped from the MAF.

While I waited for the MAF to dry, I cleaned the air filter box. First I used a plastic bag to cover the tube where the MAF used to sit. Then, using the same product I used to clean the MAF I sprayed in the air filter box, then wiped it with a paper towel.

You can see the plastic bag in the top left corner of the picture.

The rest of the dirt and dust was cleaned using a regular kitchen sponge and plain water then compressed air.

Finally, everything was clean and we started reassembling everything back in reverse order starting with the MAF, then air filter and air filter housing.

Notice the small arrow in this picture, it will show you the right way you should assemble the MAF. The arrow should point away from the air filter housing.

Don't forget the plastic bag (if you used one), the O ring and the screws.

After I was done, I test drove the car and... no more lag, acceleration is again smooth and continuous.

Many happy and safe journeys! And please don't forget to stop by the Poll section of my blog and vote! Thanks!