Volvo S60 CCM disassembly

Hello again!

Today it's another DIY post about the disassembly of the CCM or Climate Control Module. I must note that my car is a 2002 model but this tutorial is similar to all model years.

So, let's begin. First off, you will need a bone tool, or, if you are like me and have none, use a credit card or gift card to unclip the pen holder under the CCM. There are 2 plastic clips that hold this piece of trim. I recommend, if you have manual transmission to put your car in second or 4th gear so that you have a little more space to maneuver.

After you have successfully removed this trim, you will find 4 T25 Torx screws. You will need to unscrew the ones that I have marked in the photo. The other 2 hold the gear lever trim in place

You are almost done. Now, you can pull the CCM using your hands like so. The CCM is still held in place by 2 clips that are attached to the HU. Using two fingers, each on opposite sides as a lever, you can lift and pull the CCM out.  

After you pull it out you will see 2 green pin connectors (already removed in the picture but marked with the green arrows) and another connector for the cigarette lighter (that one comes out pretty hard, you may want to use a flathead screwdriver as a lever to remove it).

Hope you'll find this information useful! 

Safe journeys, and see you next time!